Abstract
This paper presents numerical studies of the Magnus effect for a kinetic turbine on a horizontal axis. To focus on the Magnus blade, a single self-spinning cylindrical blade is assumed. An iterative direct-forcing immersed boundary method is employed within the Eulerian-Lagrangian framework due to its capability to treat complex and moving geometries. The Eulerian fluid domain is discretized using the finite volume method while the Magnus rotor is represented by a set of discrete points/markers. The aim of the numerical studies is to provide insights for the design process and predict aerodynamic performances under various operating conditions. Results for stationary and self-spinning cylinders in turbulent flows are found to be in good agreement with published data. By increasing the aspect ratio of the cylinder (simulated segment length over its diameter) from 3 to 10, a 30% drop in lift coefficient and a 22% increase in drag coefficient were observed, which is believed to be attributed to an enhancement of the three-dimensionality of the near-wake. For the Magnus rotor, key parameters such as dynamic forcing and frequency, distribution of pressure coefficient and torque have been produced for two cases with different structural designs and working conditions. With increase of the aspect ratio from 3 to 10, stable forces are observed from the root side of the blade and the torque coefficient increases from 0.68 to 2.1, which indicates a superior performance in terms of power extraction.
Licence information
This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Attribution 3.0 United States