dc.contributor.author | Zhao, Z | |
dc.contributor.author | Wang, Z | |
dc.contributor.author | Kelly, JR | |
dc.contributor.author | Gao, S | |
dc.date.accessioned | 2021-05-13T14:49:01Z | |
dc.date.available | 2021-05-13T14:49:01Z | |
dc.date.issued | 2021-04 | |
dc.identifier.issn | 0018-926X | |
dc.identifier.uri | https://qmro.qmul.ac.uk/xmlui/handle/123456789/71795 | |
dc.description.abstract | This paper presents a novel Quad-Ridged Horn (QRH) antenna incorporating a balanced feed. A cross shaped fusiform structure is mounted in the center of the QRH. The fusiform structure has the effect of suppressing the cross-polarization component by improving the conventional QRH TE11 mode. The paper presents an equivalent circuit that has been derived for the proposed balanced feed network. Four SMA probes are symmetrically distributed around the horn wall and the inner conductors of the two probes facing each other are connected. The cross-polar level, within a 30-degree solid angle, is less than -23 dB from 2 GHz to 6 GHz. The measured isolation between two orthogonal linearly polarized ports is higher than 42 dB and the return loss is lower than -15 dB over the entire working frequency band. | en_US |
dc.format.extent | 1 - 1 | |
dc.publisher | Institute of Electrical and Electronics Engineers (IEEE) | en_US |
dc.relation.ispartof | IEEE Transactions on Antennas and Propagation | |
dc.title | Balanced Feed Low Cross-Polarization Quad-Ridged Horn Antenna with Center Cross Fusiform Loaded | en_US |
dc.type | Article | en_US |
dc.rights.holder | © 2021 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. | |
dc.identifier.doi | 10.1109/tap.2021.3070217 | |
pubs.notes | Not known | en_US |
pubs.publication-status | Published | en_US |
rioxxterms.funder | Default funder | en_US |
rioxxterms.identifier.project | Default project | en_US |
qmul.funder | Millimeter-wave Antennas and Components for Future Mobile Broadband Networks (MILLIBAN)::Engineering and Physical Sciences Research Council | en_US |
qmul.funder | Millimeter-wave Antennas and Components for Future Mobile Broadband Networks (MILLIBAN)::Engineering and Physical Sciences Research Council | en_US |