• Login
    JavaScript is disabled for your browser. Some features of this site may not work without it.
    Construction, validation, and application of digital oil: Investigation of asphaltene association toward asphaltene-precipitation prediction 
    •   QMRO Home
    • School of Engineering and Materials Science
    • School of Engineering and Materials Science
    • Construction, validation, and application of digital oil: Investigation of asphaltene association toward asphaltene-precipitation prediction
    •   QMRO Home
    • School of Engineering and Materials Science
    • School of Engineering and Materials Science
    • Construction, validation, and application of digital oil: Investigation of asphaltene association toward asphaltene-precipitation prediction
    ‌
    ‌

    Browse

    All of QMROCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects
    ‌
    ‌

    Administrators only

    Login
    ‌
    ‌

    Statistics

    Most Popular ItemsStatistics by CountryMost Popular Authors

    Construction, validation, and application of digital oil: Investigation of asphaltene association toward asphaltene-precipitation prediction

    View/Open
    Accepted version
    Embargoed until: 2100-01-01
    Reason: Publisher Requirement
    Volume
    23
    Pagination
    952 - 968
    Journal
    SPE Journal
    Issue
    3
    ISSN
    1086-055X
    Metadata
    Show full item record
    Abstract
    Copyright © 2018 Society of Petroleum Engineers. Digital oil, a realistic molecular model of crude oil for a target reservoir, opens a new door to understand properties of crude oil under a wide range of thermodynamic conditions. In this study, we constructed a digital oil to model a light crude oil using analytical experiments after separating the light crude oil into gas, light and heavy fractions, and asphaltenes. The gas and light fractions were analyzed by gas chromatography (GC), and 105 kinds of molecules, including normal alkanes, isoalkanes, naphthenes, alkylbenzenes, and polyaromatics (with a maximum of three aromatic rings), were directly identified. The heavy fraction and asphaltenes were analyzed by elemental analysis, molecular-weight (MW) measurement with gel-permeation chromatography (GPC), and hydrogen and carbon nuclear-magnetic-resonance (NMR) spectroscopy, and represented by the quantitative molecular-representation method, which provides a mixture model imitating distributions of the crude-oil sample. Because of the low weight concentration of asphaltenes in the light crude oil (approximately 0.1 wt%), the digital oil model was constructed by mixing the gas, light-, and heavy-fraction models. To confirm the validity of the digital oil, density and viscosity were calculated over a wide range of pressures at the reservoir temperature by molecular-dynamics (MD) simulations. Because only experimental data for the liquid phase were available, we predicted the liquid components of the digital oil at pressures lower than 16.3 MPa (i.e., the bubblepoint pressure) by flash calculation, and calculated the liquid density by MD simulation. The calculated densities coincided with the experimental values at all pressures in the range from 0.1 to 29.5 MPa. We calculated the viscosity of the liquid phase at the same pressures by two independent methods. The calculated viscosities were in good agreement with each other. Moreover, the viscosity change with pressure was consistent with the experimental data. As a step for application of digital oil to predict asphaltene-precipitation risk, we calculated dimerization free energy of asphaltenes (which we regarded as asphaltene self-association energy) in the digital oil at the reservoir condition, using MD simulation with the umbrella sampling method. The calculated value is consistent with reported values used in phase-equilibrium calculation. Digital oil is a powerful tool to help us understand mechanisms of molecular-scale phenomena in oil reservoirs and solve problems in the upstream and downstream petroleum industry.
    Authors
    Sugiyama, S; Liang, Y; Murata, S; Matsuoka, T; Morimoto, M; Ohata, T; Nakano, M; Boek, ES
    URI
    http://qmro.qmul.ac.uk/xmlui/handle/123456789/53424
    Collections
    • School of Engineering and Materials Science [328]
    Copyright statements
    Copyright © SPE All rights reserved
    Twitter iconFollow QMUL on Twitter
    Twitter iconFollow QM Research
    Online on twitter
    Facebook iconLike us on Facebook
    • Site Map
    • Privacy and cookies
    • Disclaimer
    • Accessibility
    • Contacts
    • Intranet
    • Current students

    Modern Slavery Statement

    Queen Mary University of London
    Mile End Road
    London E1 4NS
    Tel: +44 (0)20 7882 5555

    © Queen Mary University of London.