dc.contributor.author | Grasso, S | en_US |
dc.contributor.author | Sakka, Y | en_US |
dc.date.accessioned | 2016-04-25T15:17:37Z | |
dc.date.issued | 2013-06 | en_US |
dc.identifier.issn | 1882-0743 | en_US |
dc.identifier.uri | http://qmro.qmul.ac.uk/xmlui/handle/123456789/12073 | |
dc.description | Cited By (since 1996):1 Export Date: 19 August 2014 CODEN: NSKRE Correspondence Address: Grasso, S.; School of Engineering and Materials Science, Nanoforce Technology Limited, Queen Mary University of London, Mile End Road, London E1 4NS, United Kingdom; email: s.grasso@qmul.ac.uk References: Omori, M., (2000) Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 287, pp. 183-188; Munir, Z., Anselmi-Tamburini, U., Ohyanagi, M., (2006) J. Mater. Sci., 41, pp. 763-777; Cologna, M., Prette, A.L.G., Raj, R., (2011) J. Am. Ceram. Soc., 94, pp. 316-319; Ghosh, S., Chokshi, A.H., Lee, P., Raj, R., (2009) J. Am. Ceram. Soc., 92, pp. 1856-1859; Conrad, H., Yang, D., (2013) Mater. Sci. Eng., A, 559, pp. 591-594; Zhang, J., Zavaliangos, A., Groza, J., The effect of specimen conductivity on current and temperature distribution in field activated sintering (2003) International Conference on Powder Metallurgy and Particulate Materials, , Las Vegas; Zavaliangos, A., Zhang, J., Krammer, M., Groza, J., (2004) Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 379, pp. 218-228; Olevsky, E.A., Garcia-Cardona, C., Bradbury, W.L., Haines, C.D., Martin, D.G., Kapoor, D., (2012) J. Am. Ceram. Soc., 95, pp. 2414-2422; Grasso, S., Sakka, Y., Maizza, G., (2009) Mater. Trans., 50, pp. 2111-2114; Anselmi-Tamburini, U., Gennari, S., Garay, J., Munir, Z., (2005) Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 394, pp. 139-148; Vanmeensel, K., Laptev, A., Hennicke, J., Vleugels, J., Van Der Biest, O., (2005) Acta Mater., 53, pp. 4379-4388; Maizza, G., Grasso, S., Sakka, Y., (2009) J. Mater. Sci., 44, pp. 1219-1236; Grasso, S., Sakka, Y., Maizza, G., (2009) Sci. Technol. Adv. Mater., 10, p. 053001 Electrical heating of the graphite die and punch assembly is a unique feature of the spark plasma sintering (SPS) process. The high currents needed to heat the die, despite its low resistance, can produce an electric field across the ceramic specimens that may be enough to induce field assisted sintering. Despite the large number of publications of SPS, the electric field intensity has not been accounted in previous investigations. A FEM model is employed to quantify the magnitude of electric field applied during sintering across zirconia sample. We show that the electric field depends most critically on the ratio of the outer and inner diameter of the die. We also report that the intensity of the electric field across the sintering sample is significantly affected by duty cycle of the pulsed current. © 2013 The Ceramic Society of Japan. All rights reserved. | |
dc.description | Cited By (since 1996):1 Export Date: 19 August 2014 CODEN: NSKRE Correspondence Address: Grasso, S.; School of Engineering and Materials Science, Nanoforce Technology Limited, Queen Mary University of London, Mile End Road, London E1 4NS, United Kingdom; email: s.grasso@qmul.ac.uk References: Omori, M., (2000) Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 287, pp. 183-188; Munir, Z., Anselmi-Tamburini, U., Ohyanagi, M., (2006) J. Mater. Sci., 41, pp. 763-777; Cologna, M., Prette, A.L.G., Raj, R., (2011) J. Am. Ceram. Soc., 94, pp. 316-319; Ghosh, S., Chokshi, A.H., Lee, P., Raj, R., (2009) J. Am. Ceram. Soc., 92, pp. 1856-1859; Conrad, H., Yang, D., (2013) Mater. Sci. Eng., A, 559, pp. 591-594; Zhang, J., Zavaliangos, A., Groza, J., The effect of specimen conductivity on current and temperature distribution in field activated sintering (2003) International Conference on Powder Metallurgy and Particulate Materials, , Las Vegas; Zavaliangos, A., Zhang, J., Krammer, M., Groza, J., (2004) Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 379, pp. 218-228; Olevsky, E.A., Garcia-Cardona, C., Bradbury, W.L., Haines, C.D., Martin, D.G., Kapoor, D., (2012) J. Am. Ceram. Soc., 95, pp. 2414-2422; Grasso, S., Sakka, Y., Maizza, G., (2009) Mater. Trans., 50, pp. 2111-2114; Anselmi-Tamburini, U., Gennari, S., Garay, J., Munir, Z., (2005) Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 394, pp. 139-148; Vanmeensel, K., Laptev, A., Hennicke, J., Vleugels, J., Van Der Biest, O., (2005) Acta Mater., 53, pp. 4379-4388; Maizza, G., Grasso, S., Sakka, Y., (2009) J. Mater. Sci., 44, pp. 1219-1236; Grasso, S., Sakka, Y., Maizza, G., (2009) Sci. Technol. Adv. Mater., 10, p. 053001 Electrical heating of the graphite die and punch assembly is a unique feature of the spark plasma sintering (SPS) process. The high currents needed to heat the die, despite its low resistance, can produce an electric field across the ceramic specimens that may be enough to induce field assisted sintering. Despite the large number of publications of SPS, the electric field intensity has not been accounted in previous investigations. A FEM model is employed to quantify the magnitude of electric field applied during sintering across zirconia sample. We show that the electric field depends most critically on the ratio of the outer and inner diameter of the die. We also report that the intensity of the electric field across the sintering sample is significantly affected by duty cycle of the pulsed current. © 2013 The Ceramic Society of Japan. All rights reserved. | |
dc.format.extent | 524 - 526 | en_US |
dc.relation.ispartof | JOURNAL OF THE CERAMIC SOCIETY OF JAPAN | en_US |
dc.rights | • “The final publication is available at https://www.jstage.jst.go.jp/article/jcersj2/121/1414/121_JCSJ-E13028/_article” | |
dc.subject | Spark plasma sintering | en_US |
dc.subject | Field assisted sintering | en_US |
dc.subject | Yttria stabilized zirconia | en_US |
dc.title | Electric field in SPS: geometry and pulsed current effects | en_US |
dc.type | Article | |
dc.identifier.doi | 10.2109/jcersj2.121.524 | en_US |
pubs.author-url | http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000330212400011&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=612ae0d773dcbdba3046f6df545e9f6a | en_US |
pubs.issue | 1414 | en_US |
pubs.notes | Not known | en_US |
pubs.publication-status | Published | en_US |
pubs.volume | 121 | en_US |