Show simple item record

dc.contributor.authorMatsuda, Yen_US
dc.contributor.authorOkuyama, Ken_US
dc.contributor.authorYamamoto, Hen_US
dc.contributor.authorFujita, Men_US
dc.contributor.authorAbe, Sen_US
dc.contributor.authorSato, Ten_US
dc.contributor.authorYamada, Nen_US
dc.contributor.authorKoka, Men_US
dc.contributor.authorSano, Hen_US
dc.contributor.authorHayashi, Men_US
dc.contributor.authorSidhu, SKen_US
dc.contributor.authorSaito, Ten_US
dc.date.accessioned2019-10-22T13:42:19Z
dc.date.available2019-06-24en_US
dc.identifier.issn0168-583Xen_US
dc.identifier.urihttps://qmro.qmul.ac.uk/xmlui/handle/123456789/60592
dc.description.abstract© 2019 Elsevier B.V. Dental materials that are antimicrobial and acid-resistant can inhibit bacterial colonization and demineralization, thereby preventing caries. Zinc and copper are well-known for their antibacterial effect, as is nanostructured ZnO–CuO composite. Minerals such as fluorine and calcium, can remineralize and demineralize teeth. Therefore, we developed novel fluoride-containing ZnO–CuO (ZCF) nanocomposites; to the best of our knowledge, these are the first nanocomposites of this kind. The fluoride concentrations and antibacterial effects of the ZCF nanocomposites were evaluated. Nanocomposites comprising zinc and copper (ZC), and zinc, copper, and fluorine (ZCF), were prepared by a simple one-step homogeneous coprecipitation method at a low temperature (80 °C), without the use of organic solvent or surfactant. The structure and composition of the ZC and ZCF nanocomposites were examined by scanning electron microscopy–energy-dispersive spectroscopy (SEM-EDS). Quantitative analysis of the mass concentration was performed by using ZAF correction methods. The fluorine content in nanocomposites was evaluated by using proton-induced gamma emission (PIGE) at the Takasaki Advanced Radiation Research Institute in Japan. By using 96-well microtiter plates, we analyzed the antibiotic susceptibility of ZC, ZCF, and the control buffer (phosphate-buffered saline) with Streptococcus mutans (ATCC 25175). The SEM images showed that ZC and ZCF nanocomposites were composed of 3D flower-like microstructures with diameters of approximately 1 μm. Environmental SEM-EDS analysis revealed that ZC contained 43.2% Cu, 55.1% Zn, 2.2% F, and 0.1% Cl, whereas ZCF contained 47.5% Cu, 40.5% Zn, 6.7% F, and 5.9% Cl. Analysis by PIGE showed that ZCF nanocomposite contained 2553.6 ± 199.2 ppm fluorine, whereas no fluoride was detected in ZC. The control buffer enabled bacterial growth to 4 × 107 ± 9 × 106 CFU/mL, whereas ZC allowed growth of 12 ± 8 CFU/mL, and ZCF showed no bacterial growth. Thus, we developed novel fluoride-containing ZnO–CuO nanocomposites, which exhibited antibacterial effects and have the potential for remineralization, thereby demonstrating their potential as multifunctional dental materials.en_US
dc.relation.ispartofNuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atomsen_US
dc.rights© 2019. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/
dc.titleAntibacterial effect of a fluoride-containing ZnO/CuO nanocompositeen_US
dc.typeArticle
dc.identifier.doi10.1016/j.nimb.2019.06.039en_US
pubs.notesNot knownen_US
pubs.publication-statusAccepteden_US
dcterms.dateAccepted2019-06-24en_US
rioxxterms.funderDefault funderen_US
rioxxterms.identifier.projectDefault projecten_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record